Free delivery for purchases over HUF 20.000 to the entire territory of Hungary!

Do you have any questions? Contact us! +36 70/602-8300

Recharge Hose for Vehicles 134a
Recharge Hose for Vehicles 134a
16.8 (13.23+3.57VAT)

Recharge Hose for Vehicles 134a

Recharge hose with manometer suitable for the low side (LP) connection of R134a refrigerated car air conditioning systems and 1/2 "ACME right-handed needle valve recess.

Quick connector size: R134a LP (~ 13 mm)

Needle valve impress size: 1/2 "ACME right thread

 

The thread of the needle valve of recharge hose is suitable for the bottle in the Miracle Package!

 

The needle valve thread is suitable for the following products:

 

Only qualified personnel should service the vehicle's air conditioning system!

In stock
16.8 (13.23+3.57VAT)
Bonus point : 0.5 €
We recommend the following product(s) as accessories
Details

A converter valve is required for use!

Safety warning!

Do not remove the converter valve from the bottle after use. Removing the valve will release the refrigerant into the environment. Leaking refrigerant can cause personal injury.

 

USER MANUAL

1. Remove the cap from the bottle.

2. Screw the conversion pin onto the bottle.

3. Connect to the piping system.

4. Fill until the desired evaporation pressure (based on factory refrigerant) is reached.

5. Repeat the procedure to replace the bottle.

IMPORTANT! The bottles are fitted with a disposable shut-off valve at the factory. After the first use, the converter valve can be used to close the bottle.

 

QUANTITY OF REFRIGERANT REQUIRED
In all cases, the dosing must be carried out until the evaporating pressure of the original refrigerant is reached. This means a refrigerant equivalent to approximately 33% of the factory charge.

Info
Article No.:
5861
Weight:
500 g/db
Opinions
Be the first to review this product!
Similar products